Tips And Suggestions - Mx Onda MX-BBM2151 Manual De Instrucciones

How to insert the steel blades:
1. Insert the rubber ring 4 in the bottom of the
glass jug and place it so that it sits perfectly
on the glass base. Otherwise placing the
blades and the support thereof, the rubber
can be pinched and damaged. It can also
happen that being misplaced the spilled
liquid elements.
2. With caution place the steel blades 5 above
the rubber ring 4, check properly on the
rubber ring.
3. Place the blades support 6 and turn it counterclockwise, use the pins "A" to
tighten properly.
Note:
To avoid damaging the threads of the glass jug 3 or the blades support 6 to
place the support not use excessive force, find the thread gently turning the
holder counterclockwise, once found continue turning the screw support until
you feel more pressure at that time should be tightened more strongly
support the blades.
OPERATION
1. Make sure mixer is unplugged and the jar is properly attached to the base.
2. Place the ingredients in the jar and if required, using the measuring cup to
control the amount thereof (sugar, flour, etc.).
3. Before operating the blender place the lid and insert the measuring cup over
it, turning it clockwise until the clock is retained. When you want to remove
the measuring cup rotate in the opposite direction to clockwise.
4. Plug mixer to a network outlet.
5. By the sped selector 8 choose the desired 1 slow speed or 2 fast speed.
Turning the sped selector to the P position, the mixer will run at the fastest
speed, but only for the time you have turned to this position the button,
release the button as soon as the engine stops.
6. After the drawing, unplug mixer from outlet.

TIPS AND SUGGESTIONS

Creams, smoothies or vegetables (cucumbers, tomatoes, etc.)
For a smooth and creamy texture blending avoid hard foods such as potatoes,
cucumbers, etc., with more soft (tomatoes, peppers, etc.). Prepare them
separately.
6