Introduction - Brandt B1610HD LED Manual De Instrucciones

Thank you very much for purchasing this TV. To
enjoy your product from the very beginning, read
this manual carefully and keep it handy for easy
reference.
CAUTION
Never tamper with any components inside the
TV, or any other adjustment controls not
mentioned in this manual. All LED-TVs are
high voltage instruments. When you clean up
dust or water drops on the LED PANEL or
CABINET, the power cord should be pulled out
from the receptacle, then wipe the TV with a
dry soft cloth. During thunder and lighting,
unplug the power cord and antenna cord to
prevent damage to your TV. All repairs to this
TV should only be performed by qualified TV
service personnel.
Main features
① Used as Television, display terminal,
PC display;
② High luminance, wide viewing Angle;
Main parameter
Panel
TV System
Video Signal System
Resolution
Input Power Voltage
Power consumption
Audio Output Power (THD 7%) 2x W
Signal Input/Output
Horizontal definition (TV line)
INSTALLATION
*Locate the TV in the room where light does
not strike the screen directly.
*Total darkness or a reflection on the picture
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using the TV.
③ HDMI interface and SCART
④ NICAM;
15.6"
PAL-B/G、 I 、 D/K
SECAM- B/G、 D/K、L
PAL/NTSC/SECAM
1366x768
DC 12V, 3A (Power adaptor supplied)
35W
3
Analog RGB(PC)x1
High-Definition Multimedia Interface(HDMI) x2
Video Input x1
Audio Input x2
USB Input x1
、
Y、 Cb (Pb) Cr (Pr)x1
SCART X1
CI x 1
RF x1
Composite Video input >=350
Y Cb(Pb) Cr(Pr)
-4-
Interface;
>=400

INTRODUCTION

GB