NEO PROTON 12 HEX USB Manual De Usuario página 13

be set to slave mode, with the UFI set to receive.
- Note: Slave units should be con gured before con guring
master unit Note: All units should be set to same DMX
address, mode and UFI channel.
SETUP AS BELOW:
Slave units:
1. Press MENU button until 6-CH or 11-CH is dis-
played.
2. Press ENTER.
3. Set DMX address to d 1
4. Set UFI to preferred receiving channel (1-16) Attach
UFI to the PROTON 12's HEX USB port.
Master unit:
1. Press MENU button until DMX mode is displayed that
matches slave configuration.
2. Press ENTER
3. Set DMX address to d 1
4. Set to Auto or Sound-Active mode
5. Set UFI to chosen transmitting channel (1-16) Attach
UFI to the PROTON 12's HEX USB port.
OPERATING MODE PRIORITY RANK
Higher priority control modes override lower priority
modes
1. UFI
2. DMX (wired)
3. Infrared (IR6 remote)
4. Manual (onboard menu)
P. 13
PROTON 12 HEX USB
ENGLISH VERSION