Location Of Controls; Operation Tips - Rexel A4 JOY Manual De Instrucciones

location of controls

1 Pouch entrance
2 Power switch - Cold/Off/Hot
3 Jam Release Lever
operation
JOY Laminator
Connect power cord to appropriate power source
1
(fig. 1).
2 Turn the unit On with the switch located at the front
of the unit (fig. 2).
3 Position the document to be laminated into a GBC
laminating pouch, so that the document is aligned
to the folded sealed edge and the right and left
hand borders are equal (fig. 3).
4 When the ready light turns on insert the pouch and
its contents straight into the machine, leading with
the sealed edge (fig. 4).
5 The laminated item will exit from the rear of the
machine. Once the item is no longer moving, pull it
free from the rear of the machine.
Once you have finished, (fig. 5) push the power
6
switch on the front of the machine Off (fig. 6).
waste electrical and electronic equipment (WEEE)
At the end of its useful life, your product is considered to
be WEEE. As such, it is important to note that:
WEEE is not to be disposed of as unsorted municipal
waste. It is to be collected separately such that it can
be disassembled so its components and materials can
be recycled, re-used, and recovered (burned for energy
content in the production of electricity).
Public collection points have been set up by municipalities
for the collection of WEEE, free of charge to you.
Please return your WEEE to the collection facility nearest
your home or office.
If you have difficulty locating a collection facility,
the retailer that sold you the product should accept
your WEEE.
guarantee
Operation of this machine is guaranteed for one year from date of purchase, subject to normal use. Within the
guarantee period, ACCO Brands Europe will at its own discretion either repair or replace the defective machine free of
charge. Defects due to misuse or use for inappropriate purposes are not covered under the guarantee. Proof of date of
purchase will be required. Repairs or alterations made by persons not authorised by ACCO Brands Europe will invalidate
the guarantee. It is our aim to ensure that our products perform to the specifications stated. This guarantee does not
affect the legal rights which consumers have under applicable national legislation governing the sale of goods.
Register this product online at www.rexeleurope.com

operation tips

DO NOT LAMINATE AN EMPTY POUCH.
Never insert the loose end of a pouch first in to the
machine, this could cause the machine to jam. Always
insert the sealed edge first.
Before laminating important or unique documents,
always run a test document and pouch first.
As soon as lamination is completed, remove the sealed
pouch from the rear of the machine and place on a cool
flat surface for cooling to prevent the document from
curling.
Do not block the vent slots, this will cause the machine
to overheat.
Do not cut pouches prior to lamination.
If you are no longer in contact with your retailer, please
contact ACCO for assistance with this matter.
Recycling of WEEE is geared toward protecting the
environment, protecting human health, preserving raw
materials, improving sustainable development, and
ensuring a better supply of commodities in the European
Union. This will be achieved by retrieving valuable
secondary raw materials and reducing the disposal of
waste. You can contribute to the success of these goals by
returning your WEEE to a collection facility.
Your product is marked with the WEEE symbol (wheelie
bin with an X through it). This symbol is to inform you
that the WEEE is not to be disposed of as unsorted
municipal waste.
G
5