Obligations Of The Operator - hafele WT 200 Instrucciones De Montaje

2.6 Obligations of
the operator
66
Operator is the person who operates the access control system for commercial or
economic purposes or a allows third party for use thereof and bears the legal product
responsibility for the protection of the user, the personnel, or third parties during
operation.
Operator's obligations
The access control system is commonly used in the commercial sector.
The operator of the access control system is therefore subject to statutory
occupational safety obligations.
In addition to the safety notes in these instructions, safety, work safety, and
environmental regulations valid for the area of application of the access control
system must be followed.
Here, in particular:
• The operator must ensure that escape routes and emergency exit doors are
accessible for all people in case of danger.
• The operator must be aware of the applicable occupational safety regulations
and determine other hazards in a hazard assessment that may arise from the
special working conditions at the place of use of the access control system.
They must be implemented for the operation of the access control system in the
form of operating instructions.
• During the entire operating time of the access control system, the operator must
verify that the operating instructions created correspond to the current state of
the regulations and, if necessary, adapt them.
• The operator must clearly regulate and specify the responsibilities for
installation, operation, troubleshooting, maintenance, and cleaning.
• The operator must ensure that all persons handling the access control system
have read and understood these instructions. In addition, the operator must
train the personnel at regular intervals and inform them about the risks.
Furthermore, the operator is responsible for ensuring that the access control system
is always in perfect technical condition. The following therefore applies:
• The operator must ensure that the maintenance intervals specified in these
instructions are followed.
• The operator must have all safety devices inspected regularly for function and
completeness.
NOTE
Damage to product due to computer viruses!
Since the SD card of the WTC 200 is recognised and treated as mass
storage by every PC it is connected to, there is the risk that computer viruses
may spread via the SD card.
• For this reason, the system operator must ensure that all relevant PCs
are tested for computer viruses at regular intervals and protected with
up-to-date anti-virus programs.