Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
-
To remove the memory card: press the card and it will pop out by approximately one third and
you can then remove the card.
-
This product supports hot plugging.
*
System time and date setting:
-
Please set the system date and time after inserting the batteries.
-
Press menu button, select "Set date" using the selection key and press menu button again to
enter the date.
-
Select the "Set date" key, press the menu button to enter and use the "
digit to be set and use "
-
If you want to add date and time information to the photos, you can set the "Display time &
date" option to ON, otherwise select OFF.
*
Auto-power off setting:
-
This device has a user-defined setting for auto-power off.
-
If you need to change the default setting, please press the "Menu" button, then select "Auto-
power off" and press the "Menu" button to confirm.
There are 4 options to choose from in this menu: 10S/20S/30S/OFF.
-
20S is the default mode, and is the best option for balanced power consumption and operating
convenience.
-
OFF mode is for laboratory testing and for customers with special needs. Caution: in this mode
the screen will stay on until it is manually turned off; if it is not turned off the batteries will
quickly run out of power.
*
Visitors
-
When visitors press the door bell button of the door viewer, the door bell will ring inside the
room.
-
At the same time, the screen inside the door will be switched on automatically to show the
outside images and will remain on for 20 seconds before switching itself off.
-
If the door bell is pressed, the camera will automatically take a photo of the visitors and the
photo will be stored on the TF card in case the host is not at home. This will allow the host to
check the visitors' identity or use the information for security purposes.
*
To view outside
-
Press the ON/OFF button, and an image of the surroundings outside the screen will be
displayed.
-
The screen will automatically power off after 20 seconds if no other actions take place.
-
After switching on the product, press the ON/OFF button again and the product will be
switched off again.
-
Photos and videos can be recorded whilst viewing the outside with this product.
*
To check the surroundings outside and take photos or videos
-
Photos and videos can be recorded whilst viewing the outside with this product.
-
When the screen is on, press " " to take a photo.
-
To record a video, press " " until the instruction icon for switching into video recording mode
appears, and press " " to start recording, and pressing " " again will stop the video recording.
" to adjust the number.
" key to select the
15/44
Publicidad
Tabla de contenido
