Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI HDBASET LITE EXTENDER OVER CAT KIT - 4K 60HZ
Features
Bi-directional Power over Cable (PoC), when transmitter or receiver is plugged in to power,
•
both sides are powered on
Extend 4Kx2K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a cable
•
Extend 4Kx2K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable
•
HDMI 1.4 with 4K at 60Hz, 4:2:0, 8bit and HDCP 2.2 compliant
•
Certified through the HDBaseT Certification process
•
Mounting Bracket Installation
Note: Before installation, please ensure the unit is disconnected from the power source.
1.
Choose a suitable location for mounting bracket installation.
2.
Position and install the mounting brackets of the transmitter with the two mounting
screws provided.
3.
Repeat step 1 for the receiver.
4.
Mount and secure the transmitter and receiver to a surface or a suitable location
respectively with mounting screws.
Cable Installation
Note: Before installing cables, please ensure the unit is disconnected from the power source.
1.
Connect HDMI IN: Connect an HDMI source device (e.g. Laptop, Blu-ray player, etc.) to HDMI IN of the transmitter using a high-quality HDMI
cable.
2.
Connect HDBT: Connect HDBT Out of the transmitter to the HDBT IN of the receiver using a Cat 5e/6/6a cable.
3.
Connect HDMI OUT: Connect an HDMI display device (e.g. TV, monitor, projector, LCD/LED display, etc.) to HDMI OUT of the receiver.
4.
Connect the power adapter provided to either the transmitter or receiver.
5.
Power on all attached devices.
3
Package Contents
1 x Transmitter
•
1 x Receiver
•
1 x 18V 1A Power Adapter
•
4 x Mounting Bracket
•
1 x Manual
•
(us)
(us)
Publicidad
Tabla de contenido
