Sd Memory Card - FTE Maximal PRO 300 Manual De Usuario

2.3 SD memory card

PRO 300 detects memory cards formatted in FAT16. The maximum capacity that it can endure in this format is 2 GBytes.
If the programmer has a SD card inside itself when connecting, it will follow the next steps:
When connecting the feeding, the programmer will make the following steps:
SD Card Detected
1. Detecting the card
SD Card Detected
SD Card Initialized
FAT16 Initialized
3. Verifying the format
Note: If the programmer does not recognize the format of the SD card, because the format is not correct or
because the card is damaged, it will not make the 3rd and 4th step.
2.3.1 Folders
Two new folders will be created:
card had such folders created already, the programmer only will verify the format.
Channels
Channels
The folder will keep the different configurations of the devices that are programmable from PRO 300 (Genius,
DVB 300, DVB 310, etc).
Programms
The new software versions of the devices that are programmable through PRO 300 will be saved in
this way the updating can be done directly. This new option will avoid having to take a PC to the installation when a device
has to be updated.
2.4 Configuration saving
Once the different devices (DVB 310, Genius ICT, etc) are programmed, PRO 300 allows saving the different
configurations in the Channels
Note: The maximum length of the name of the files in the SD is 8 characters; therefore if they exceed this
number they must be re-named.
User's manual · PRO 300
Programs Channels
and
folder in the SD card.
SD card Detected
SD card Initialized
2. Initializing the card
Reading module . . .
4. Loading the corresponding program to the connected
device and detecting the module
the first time you insert the card in the programmer. In case this
- 4 - PRO 300
Programs folder and
Version_en_1.0 FTE maximal