Resetting The Appliance; Lengthy Downtimes Of Appliance - Angelo Po 0G1CP1EC Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

RESETTING THE APPLIANCE

If the safety thermostat is tripped, the appliance has
to be restored to the initial working conditions as fol-
lows.
1 - Allow the water to cool by 30-40°C
2 - Open the hatch (A).
3 - Press the button (B) of the safety thermostat to
restore the electricity supply.
4 - Close the door (A) when the operation is com-
plete.

LENGTHY DOWNTIMES OF APPLIANCE

If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Cut off the mains electricity supply using the ap-
pliance's master switch.
2 - Clean the appliance and the surrounding areas
thoroughly.
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the following
rules should be adopted.
– Use only the accessories recommended by the
constructor.
– Immerse the baskets in the boiling water very
slowly to avoid the formation of foam.
– To drain the baskets, suspend them on the hang-
er provided.
– Before filling the well, check that the drain tap (C)
is turned off.
– Check that the water level never drops below the
minimum level marked (B).
– Fill the baskets with the right quantity of pasta tak-
ing into account the type of pasta and the expect-
ed increase in volume during cooking.
– Always wait until the water is boiling before im-
mersing the baskets.
– Adjust the water flow so that the water is main-
tained at boiling temperature and continuously re-
newed to remove the starch.
B
B
3 - Spread a film of edible oil over the stain-
less steel surfaces.
4 - Carry out all the servicing procedures.
5 - Leave the appliance uncovered and the
cooking chambers open.
C
- 9 -
A
0G1CP1EC
IDM-39613600300.tif
A
0G1CP1E
IDM-39611700900.tif
B
IDM-39603600800.tif
IT
GB
DE
FR
ES
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0g1cp1e

Tabla de contenido