Before Use; Safety Instructions - JB Systems Light TUBELED Manual De Instrucciones

ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read
these operating instructions very carefully.
The JB Systems TUBELED™ system contains the following components:
 The 1m long TUBELED™ tubes: to be connected to the controller.
 The TUBELED™ controller: controls the connected led tubes.
 Signal extension cables: 5m or 10m.
 Power extension cables: 5m, 10m or 20m.
This manual only explains the functions of the controller.
FEATURES
 Dedicated controller used to control the TUBELED™ led tubes (not included)
 Controls up to 4000 tubes, no extra power boosters needed.
 38 preprogrammed patterns
 Auto mode scans all patterns automatically
 Pattern selection by DMX512:
Channel1: choose patterns
o
Channel2: speed control
o
Channel3: interval time
o
Channel4: strobe/flash rate
o
 RGB color mixing, controlled by DMX512 (make your own colors):
Channel1: not used (set to zero)
o
o Channel2: dimming red color
Channel3: dimming green color
o
Channel4: dimming blue color
o
 Adjustable strobe function
 Adjustable speed and interval time for most patterns
 Nice plastic enclosure can be fixed on the wall
 Auto save function: saves the last working mode for all patterns individually.
 Perfect for use in: retail stores, commercial displays, architectural lighting, indoor and outdoor
decoration, clubs, pubs, mobile DJs, trussing, ...

BEFORE USE

Check the contents:
Check if the carton contains the following items:
 TUBELED™ controller
 Mains DC Adapter 12V 500mA
 Operating instructions
JB SYSTEMS®
OPERATION MANUAL
1/41 TUBELED™ CONTROLLER
ENGLISH

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top
CAUTION
cover. No user-serviceable parts inside. Refer servicing to qualified
service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures
when bringing it into a warm room after transport. Condense sometimes prevents the unit from
working at full performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases,
shall be placed on this appliance. Electric shock or malfunction may result. If a foreign object enters
the unit, immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations
for electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition: switch the unit immediately off when the power
cord is squashed or damaged.
 Never let the power-cord come into contact with other cables!
 This appliance must be earthed to in order comply with safety regulations.
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the
same type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact your dealer
immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
JB SYSTEMS®
OPERATION MANUAL
2/41 TUBELED™ CONTROLLER