Information And Recommendations; Technical Characteristics; Ip_Axes I/O; Compatibility - Fermax 5282 Manual De Instalador

Cod. 97847 V06_17

INFORMATION AND RECOMMENDATIONS

•
This product complies with the requirements
2011/65/UE. See website www.
http://docweb2.fermax.com/docs/decconformidad/EN/F05282.pdf.
• Cabling recommendations: the cables used to connect readers, the network and other pe-
ripherals must be installed in accordance with the instructions for Level 2 (protected envi-
ronment) of standard NF EN 61000-4-4.
• This product must be installed by an approved company. Incorrect installation and use may
result in electric shock or fire. Before installation, read the technical information and comply
with the recommendations for assembling the product.

TECHNICAL CHARACTERISTICS

3) IP_AXES I/O

Maximum power consumption ............ 500 mA
Supply voltage ....................................... 9 – 14VDC
Weight with housing ............................. 200 g
Housing dimensions .............................. 157 x 120 x 30 mm
Operating temperature ......................... - 20°C to + 50°C
Control relay ......................................... 1A / 12V – 1A / 24V

4) COMPATIBILITY

Version of the IP_AXES 1/2 unit: V1.4 or higher
Version of IP_AXES software: V1.0.0.7 or higher
To update your IP_AXES 1/2 unit, go to the "Update" menu in IP_AXES, select the file "UTL
V.1.4.bin" and then select the units to update.
Warning: before performing this operation, ensure that your unit is correctly connected to the
software ("Site configuration" menu then "Equipment status").
3200292
of Directive RED 2014/53/UE and Directive RoHS
fermax
.com. FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
Page 10/23