Using Your Floor Steamer; Microfibre Pad Care - Euroflex MONSTER EZ1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51

USING YOUR FLOOR STEAMER

Step one:
Affix either your hard surface cleaning pad or carpet sledge with its special pad to your floor
steamer
WARNING
To prevent floor damage, ALWAYS attach either the HARD SURFACE FLOOR PAD or the CARPET
SLEDGE ACCESSORY W/PAD when using your floor steamer. NEVER use without either of these
attachments affixed to the machine.
ATTACHING THE HARD SURFACE MICRO FIBER PAD
Place the pad face down on the floor, wide side front and with the
white hook and loop strips facing up. Hold your floor steamer about 2"
above the pad and gently drop the floor steamer onto the pad. Firmly
press down briefly to assure full adhesion and your pad will be securely
fastened to the floor steamer.
ATTACHING THE CARPET GLIDE W/PAD
Place the pad face down on the floor, wide side front and with the
white hook and loop strips facing up. Hold your floor steamer about 2"
above the pad and gently drop the floor steamer onto the pad. Firmly
press down briefly to assure full adhesion and your pad will be securely
fastened to the floor steamer.
MICROFIBER PAD CARE
Your micro fiber pads are designed to be used for hundreds of times. Regularly clean your
pads either by hand (using mild soap and warm water) or in your clothes washer on a deli-
cate cycle, cool water. Never use fabric softener or bleach. Best to let the pads air dry to
maintain maximum long term effectiveness.
Washcare
90% Polyester / 10% Polyamide
Hand wash only
Tumble dry low or air dry
No bleach / No fabric softener
ULTRA MICROFIBRE
21
80% Polyester / 20% Polyamide
Hand wash only
Tumble dry low or air dry
No bleach / No fabric softener

Publicidad

Tabla de contenido
loading

Tabla de contenido