Descargar Imprimir esta página

Orbegozo BV 5030 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

BV 5030 - BV 5025
If blending action stops during blending or ingredients stick to the sides of the jar, turn blender
OFF. Remove the cover and use a rubber spatula to push mixture towards blades.
Do not store food or liquids in the blender jar.
Avoid bumping or dropping the blender.
HOW TO CLEAN THE BLENDER
Unplug the blender from electrical outlet.
Remove the jar from the blender base. Remove the lid, add a cup of cleaning solution made by
adding a few drops of dishwashing detergent to 1 cup of water to the lid. Scrub and flush out the
interior of jar and the lid to dislodge and remove as much residue as possible. Empty the jar.
Add more cleaning solution, put lid on jar, place in on motor base and run on high speed for two
minutes.
Empty the lid and repeat as above using clean rinse water in place of cleaning solution. Empty,
rinse and dry prior to storing unit.
Wipe blender base, control panel, and cord with a damp cloth or sponge. To remove stubborn
spots, use a mild, non-abrasive cleanser.
Carefully wash blade assembly, gasket, jar and cover in hot, soapy water. Rinse and dry
thoroughly. Do not soak. Do not wash blade assembly, gasket, jar, or cover in a dishwasher.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and
the environment. The crossed out "wheeled bin" symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately collected. Consumers
should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage Directive
2006/95/EC and the requirements of the EMC directive 2004/108/EC.
11

Publicidad

loading

Este manual también es adecuado para:

Bv 5025