Cleaning And Maintenance Instructions - tuctuc WHEELED BOARD WITH SEAT Instrucciones De Uso

3. Attaching the saddle
1. Turn the board part around, remove the cap using the corresponding tool (see image), and
remove the cover. Then place the fixed saddle tube in the appropriate location, making sure
it is positioned correctly. You will know it has been attached correctly when you hear a "click".
2. Press the release button at the base of the board part and remove the saddle.
4. Adjusting the length of the bar
1. Press the adjustment button on the connector tube, moving it in the direction of the tube
until you reach the desired position. There are five different positions. Make sure that you
adjust the length from left to right.
2. Release the adjustment button, hold the connector tube firmly and move it along the length
of the bar. Make sure the connector tube is fixed in place and has been adjusted correctly.
5. Adjusting the saddle
1. Press and hold down the telescopic-adjustment button (located beneath the saddle towards
the front).
2. Release the telescopic-adjustment button and adjust the saddle to the desired height. There
are three different height settings.
3. Press and hold down the telescopic-adjustment button (located beneath the saddle) in
order to rotate the saddle and make sure it is flat.
4. Press down on the saddle to make sure it is fixed in position and that it has been adjusted
correctly.
6. Balancing the saddle
1. Press on the knobs, turning them in order to unlock them.
2. Place the board part in the horizontal position.
3. The mark on the adjustment connector must be aligned with the mark on the board part
(see the small image). Then adjust the knob on the board part to complete the process.
7. Hanging the board part
1. Attach the buckle at the end of the strap to the buckle on the base of the board part. You
may also adjust the length of the strap.
2. Attach the other end of the strap to the buggy's handlebar, and hang the board part from it.
This will make it easier to manoeuvre the buggy.

Cleaning and maintenance instructions

You can clean the product using a mild detergent and a damp cloth.
11