Technical Data - V2 PROTEO12-D Manual De Instrucciones

12 channels 434.15 MHz transmitter with display and timer function
PROTEO12-D is a radio transmitter which controls automatic shutters and awnings; it allows you to control up to 12 individual
automations or 8 multiple groups.
It can operate in "manual" mode, where you control the automatisms, or in "automatic" mode, where PROTEO12-D controls the
automatisms according to the scheduled events.
Events
Possibility to schedule up to 5 events/day
An event is the occurrence of an automatic control of a movement (opening or closing of shutters, moving up and down of awning, etc. )
in a given moment of the day on one or more days of the week.
For example, an event is the command to open the rolling shutters at 9:00 AM on Saturday and Sunday while another event is the rewind
of awnings at 7:45 PM on all the days of the week.
Groups
A "group" means a set of automatisms operated at the same time; for example the awning facing South can be a first group and all the
rolling shutters of the living room the second group.
In automatic mode groups are created during events scheduling and allows the creation of a different group for each event.
In manual mode the groups must be set according to the dedicated procedure; in this mode, you can manage up to 8 groups.
SUN function ON/OFF
This function is used to enable or disable the sun sensor and can be managed in either automatic or manual mode.
SUN OFF
The intervention of the anemometer on the selected motors / control units is disabled.
In automatic mode SUN OFF must be associated with an event.
In manual mode, to transmit the SUN OFF command, you must select the desired channel or the group and press simultaneously
STOP+DOWN for at least 10 seconds, until the motor moves for about 1/2 second in both directions, indicating the completion of the
procedure.
SUN ON
The intervention of the anemometer on the selected motors / control units is enabled.
In automatic mode SUN ON must be associated with an event.
In manual mode, to transmit the SUN ON command, you must select the desired channel or group and press simultaneously STOP+UP for
at least 10 seconds, until the motor moves for about 1/2 second in both directions, indicating the completion of the procedure.

TECHNICAL DATA

Power supply
Frequency
Range in open field
Max.absorption
Dimensions
Weight
1 x Lithium 3V (CR2032 230mAh)
434,15 MHz
300 m
< 15 mA
160x45x14 mm
75 g
99/05/CE DIRECTIVE CONFORMITY
The PROTEO12-D transmitters are in conformity with the
provisions of the following EC directive(s), and with the standard
referenced here below:
EN 60950, EN 301 489-1, EN 301 489-3, EN 300 220-2
Racconigi, 20/02/2014
V2 SPA legal representative
Cosimo De Falco
13