Safety Symbols - Force PT100942 Manual De Operador

d) Disconnect the plug from the
power source before making any
adjustments, changing accessories, or
storing the tool. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
e) Store idle tools out of reach of
children and other untrained persons.
Tools are dangerous in the hands of
untrained users.
f) Maintain tools with care. Keep cutting
tools sharp and clean. Properly
maintained tools with sharp cutting edge
are less likely to bind and are easier
to control. Do not use a damaged tool.
Tag damaged tools "Do not use" until
repaired.
g) Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool's operation. If damaged,
have the tool serviced before using.
Please read all of the safety and operating instructions carefully before using
this tool. Please pay particular attention to all sections of this Operator's
Manual that carry warning symbols and notices.
!
Ø
A
Hz
~
.../min
GENERAL SAFETY RULES

SAFETY SYMBOLS

Voltage
Diameter
Amperes
Hertz
Alternating Current
Revolutions per minute
Safety Class II
Construction
Many accidents are caused by poorly
maintained tools.
h) Use only accessories that are
recommended by the manufacturer
for your model. Accessories that may
be suitable for one tool may become
hazardous when used on another tool.
5. Service
a) Tool service must be performed only
by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
b) When servicing a tool, use only
identical replacement parts. Follow
instructions in the Maintenance section of
this manual. Use of unauthorized parts or
failure to follow Maintenance instructions
may create a risk of electric shock or
injury.
3