CHAFFOTEAUX ARIANEXT-R Instrucciones Del Usuario página 21

MANUAL MODE OPERATION HEATING OR COOLING
Manual mode disables heating/cooling schedule programming. Man-
ual operation allows the heating/cooling function to be kept on con-
stantly.
To select manual heating/cooling, press OK and turn the knob to se-
lect:
- Time program / Manual
Press the OK button.
Turn the knob and select:
- Manual
Turn the knob to select Manual mode, then press the OK button. Press
the OK button again to save these settings. The display reverts to
showing the previous screen.
Press the back button until the main screen reappears.
DOMESTIC HOT WATER SETTINGS
Press the OK button. Turn the knob and select:
- Complete menu
Press the OK button. Turn the knob and select:
- DHW Settings
Press the OK button. Turn the knob and select:
- DHW comfort setpoint temp
Press the OK button twice.
Turn the knob and select the desired temperature for the domestic
hot water.
Press the OK button to confi rm.
Press the back button " " to return to the previous screen.
The comfort function allows for reducing the standby time when the
request for domestic hot water is activated.
Turn the knob and select
- Comfort function
Press the OK button.
Turn the knob and select among the following:
- Disabled
- Time Based (activates the comfort function in certain time periods
adjustable according to the system installed).
- Always Active
- HC/HP (excludes the heating element during the high energy rate
period, in the presence of the appropriate signal only in heat pump
systems).
- HC/HP 40 (sets the reduced set-point during the high energy rate
period, in the presence of the appropriate signal only in heat pump
systems).
Press the OK button
- GREEN (DHW service managed only by the heat pump according
to the DHW auxiliary time program)
Press the OK button
The BOOST function allows for reaching the set temperature for the
domestic water in a shorter time. Turn the knob and select:
- Domestic Hot Water BOOST
(HP System)
Press the back button " " to return to the previous screen
DOMESTIC HOT WATER SCHEDULE PROGRAMMING
Press OK to set domestic hot water schedule programming.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- DHW Settings
Press the OK button. Turn the knob and select:
- Time program
Press the OK button. Turn the knob and select:
- Free time program
- Preset programs
Turn the knob and select:
- Free Time programming
Press the OK button. Turn the knob and select:
- DHW
- Auxiliary (Module for the instantaneous production of hot water
with DHW, electricsolar recirculation pump)
In both cases, turn the knob and set the comfort and reduced tem-
perature, then press the OK button to confi rm.
Turn the knob and select:
- Set programming
Press the OK button. To set the programming, follow the procedure
described in the chapter "heating schedule programming".
To facilitate schedule programming procedures, turn the knob and se-
lect:
- Preset programs
Press the OK button.
Turn the knob and select:
- DHW
- Auxiliary (Module for the instantaneous production of hot water
with DHW, electricsolar recirculation pump)
In both cases, turn the knob and set the comfort and reduced tem-
perature, then press the OK button to confi rm.
Turn the knob and select:
- Set time program
Press the OK button. To set the programming, follow the procedure
described in the chapter "heating schedule programming", pre-set
programs paragraph.
- Family program
- No lunch program
- Midday program
- Always active
Press OK to confi rm the choice, and press the back button "
return to the previous screen.
Selecting manual mode
21
" to