Setting The Microphone Sensitivity (Vox) - Topcom BABYTALKER 3500 SEDS Manual De Usuario

Babytalker 3500 SEDS
• Temperature Unit: selects temperature display in °C (Celsius) or °F (Fahrenheit).
– Press button
23
– Repeatedly press button
– Press button
27
– Repeatedly press button
'Set Range', for setting the temperature range;
'Temp Alert', for setting the temperature alert;
'Degree F', to display the temperature in °F (Fahrenheit);
'Degree C', to display the temperature in °C (Celsius).
– Press button
23
Option 'Set Range' selected:
– Repeatedly press button
– Press button
27
– Repeatedly press button
– Press button
27
– Press button
23
If you select the option 'Temp Alert', you will see:
'On?' if the alert is off;
'Off?' if the alert is on.
– Press button
27
– Press button
26
– Press button
27
– Press button
23
Option 'Degree F' or 'Degree C' selected:
– Press button
27
– Press button
23

9.8.7 Setting the Microphone Sensitivity (VOX)

You can configure the sound detection sensitivity (VOX) of the babyphone. If the sensitivity is set high, the baby
unit will pick up weaker sounds.
– Press button
23
– Repeatedly press button
– Press button
27
– Repeatedly press button
• The VOX sensitivity is indicated by a black bar on the display:
- high sensitivity
- low sensitivity
– Press button
27
– Press button
23
9.8.8 Setting the Sound Alert
The sound detection sensitivity is indicated by the number of LEDs
control of the unit is set to'Volume Off', an alert signal can be generated when the sound level picked up by the
baby unit reaches the range of the red LEDs.
– Press button
23
– Repeatedly press button
– Press button
27
– You will see:
'On?' if the alert is off;
'Off?' if the alert is on.
. 'Night light' is displayed.
until 'Temperature' is displayed.
28
.
until the desired option is displayed:
28
to select the indicated option.
or until the desired upper limit is shown (max. 39 °C).
26 28
.
or until the desired lower limit is shown (min. 10 °C).
26 28
.
to exit the menu.
to select the indicated option.
or to select the desired alert volume.
28
.
to exit the menu.
to select the indicated option.
to exit the menu.
. 'Night light' is displayed.
until 'Sensitivity' is displayed.
28
.
or until the desired sensitivity is shown.
26 28
.
to exit the menu.
. 'Night light' is displayed.
until 'Sound Alert' is displayed.
28
.
at the top of the parent unit. If the volume
17
9