Technical Data - Beper RI.312 Manual De Instrucciones

Gas heater Use instructions
● periodically clean the exterior and rear cylinder, storage area of your heater to remove
dust an lint built­up, which may affect operation of the heater.
● light vacuuming with a soft brush will remove any dust built­up on the surfaces of the
ceramic elements. do not scrape of knock these elements as they may become very
fragile with use.
● do not abrasive products to clean the heater.
● watch the pilot flame while it is in operation. it should burn steadily, if it flickers or is
yellow tipped, the heater should be checked for correct operation.
● if any parts need replacement, they must be replaced only with genuine original parts
supplied by the manufacturer. the use of incorrect or substitute the parts may be dange­
rous and will void any warranty.
Operate the heater according to following procedures when electric power is used.
The electric heating system is designed with technology of infrared radiation. Even if it
is used in an unsealed and large size room, heating efficiency will be perfect. Choose

TECHNICAL DATA

Heat input: 4,2 Kw
Gas type: L.P.G
Gas category: I3+(28~30/37)
Gas pressure: 28~30 mbar
Gas consumption: 292g/h at Max.
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.
16