Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
• BY-PASS: machine function that is activated when the lever of the gun is released during
normal use. In this condition, the pressure gauge indicates lack of pressure and the pumped
water is sucked back thanks to the pressure regulation valve.
• TOTAL STOP: device that when present immediately stops the machine cleaner after the
lever of the gun has been released or after a few seconds of running in the by-pass mode
(Timed Total Stop).

INTENDED USE

• The machine is intended for the following use only:
- Cleaning of vehicles, machines, buildings, tools, etc with water, if necessary mixed with
the manufacturer's recommended detergent;
- Distribution of detergents recommended by the manufacturer;
- Descaling and clearing of blocked pipes, hydro sandblasting by means of special accessories
recommended by the manufacturer.
• The machine must not be used:
- To wash people, animals, live electrical equipment, delicate objects or the high-pressure
cleaner itself;
- In environments in which explosive or corrosive atmospheres are present.
• Contact the Manufacturer's technical assistance service for use inside vehicles, ships or aircraft,
because additional instructions may be necessary.
Any other use must be considered improper and the manufacturer cannot be
considered responsible for possible damages caused by the improper or incorrect use.
MEANING OF THE SYMBOLS USED
18
WARNING. Read the instructions before using the machine.
WARNING. Do not direct the jet at persons, animals, live electrical
equipment or the machine itself.
Machine not suitable for connection to the potable water mains.
WARNING. Hot. Do not touch.
WARNING. Do not inhale fumes.
(continued on next page)

Publicidad

Tabla de contenido
loading

Tabla de contenido