Specific Safety Instructions - Perel Tools PRD1801 Manual Del Usuario

• When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Always make sure you are in a stable position while using the PRD1801/PRD18012/PRD18013.
• Make sure you can never touch water, electricity or gas lines while working.
• Do not use the PRD1801/PRD18012/PRD18013 in the vicinity of flammable vapours and substances.
• Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
• Check the voltages marked on the rating plate and verify it matches your mains voltage.

3. Specific Safety Instructions

• Remove the battery from the machine during maintenance and when it is not used for a longer period of time.
• Only use the prescribed charger to load the battery. Do not charge other batteries than the prescribed type (18V
DC).
• Only use the charger in a dry environment and a temperature between 10°C and 40°C.
• Only use the charger and battery when both are not damaged.
• Prevent the battery from shortcutting.
• Never attempt to open the battery.
• In case of skin contact with the battery liquid (a solution of 20-30% potassium hydroxide), flush immediately and
abundantly with water. Neutralize with a mild acid like lemon juice or vinegar. In case of eye contact, rinse
abundantly for at least 10 minutes with clean water and consult a physician.
4. Description
1. Chuck sleeve
2. Torque adjustment collar
3. Keyless chuck
4. Forward/reverse switch
5. ON/OFF switch
6. Battery
7. Battery release button
PRD1801/PRD18012/PRD18013_v2 4 PEREL