COFAN 0900 0901 Manual De Instrucciones página 9

07
1. General Safety and Operation Instruction
1. Unpacking.
When unpacking this product, carefully inspect for any damage that may have occurred during
transit Make sure any loose fittings, bolts, etc., are tightened before putting this product into service.
2. This product is a part of a high pressure system and the following safety precautions must be
followed at all times along with any other existing safety rules.
3. Read all manuals included with this product carefully Be thoroughly familiar with the controls and
the proper use of the equipment.
4. Only persons well acquainted with these rules of safe operation should be allowed to use the air
tool.
Do not exceed maximum operation pressure of the air tool(4 BAR/58 PSI). The air tool could
explode and result in death or serious personal injury.
5. Do not exceed any pressure rating of any component in the system.
6. Disconnect the air tool from air supply before changing tools or attachments, servicing and during
non-operation.
7. Do not depress trigger when connection the air supply hose.
8. Always use attachments designed for use with air powered tools. Do not use damaged or worn
attachments.
9. Never trigger the tool when not applied to a work object. Attachments must be securely attached.
10. Protect air lines from damage or puncture.
11. Never point an air tool at oneself or any other person.
12. Check air hoses for weak or worn condition before each use. Make sure all connections are
secured.
Release all pressure from the system before attempting to install, service, relocate or per-
forms any maintenance.
13. Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition.
Never carry a tool by the hose or pull the hose to move the tool or a compressor. Keep hoses
away from heat, oil and sharp edges. Replace any hose that is damaged,
weak or worn.
ENGLISH