Led Indication; Care And Maintenance; Safety Information - Velleman BTSP1 Manual Del Usuario

9. Restoring to Default Settings
• To restore the speakerphone to its original settings go to standby mode and
press and hold the V+ and V- for ±10 seconds until the blue and red LED flash 5
times.
• When the speakerphone was connected to a mobile phone before the restore
default settings procedure, it will enter pairing mode automatically. When it was
not connected, it returns to standby mode after restoring default settings.

10. LED indication

Mode
Off
Switch on
Switch off
Standby
Standby – low battery
Talking
Pairing completed
Mute
Charging
Charging completed
Lost connection
Restoring default
settings

11. Care and Maintenance

• Do not expose the speakerphone to rain, humidity, high temperatures and direct
sunlight.
• Protect the speakerphone from sharp objects to avoid scratches.
• Clean the speakerphone with a dry cloth. Do not use abrasive cleaning solvents.
• There are no user-serviceable parts. Do not attempt to disassemble the
speakerphone.
• Store the speakerphone in a dry place away from dust, humidity and high
temperatures.

12. Safety Information

• Check the local regulations regarding the use of a mobile handset and
speakerphone while driving. Ensure that your attention and focus remains on
your responsibility of driving safely.
• Never allow children to play with the speakerphone.
• Observe all signs requiring RF radio products to be switched off, i.e. in hospitals,
blasting areas, potentially explosive atmospheres and prior to boarding an
aircraft.
• Never place or store the speakerphone over the area of the vehicle's airbag
deployment.
31.01.2011
BTSP1
Red LED
Off
5 flashes
Flash every 3s
Flash alternatively
Flashing
On
Off
5 flashes
7
Blue LED
Off
5 flashes
Flash every 4s
Flash every 3s
Off
Flash every 3s
Rev. 06
Sound
1x bi
1x bi
2x bi
Per minute
1x bi
©Velleman nv