Publicidad
Idiomas disponibles
Idiomas disponibles
Cod. 970079
V10_19
STEP 2: Set 'D. Release Time'
STEP 3: Set wiegand format. Select 34_MI. Before registering fingerprints and cards to the reader.
Go to "AC Settings".
Go to "Wiegand Format"
STEP 4: Manually register users.
USER MANUAL PROGRAMMING
1 º Register the fingerprints and/or cards of the different users.
1- Access the menu by pressing the fingerprint sensor for more than 3SG.
2- select "User" and press OK. (Remember arrow down is at the bottom left of the sensor and
the OK at the bottom right of the sensor. According to the sensor's reblock. See image 1.)
3- Select "Register" and press OK.
4- Enter User ID and privilege (user or administrator)
5- record track or/and card
6- Scan the fingerprint 3 times to register it. Two fingerprints are allowed per user ID.
7- Present the MIFARE card to the reader to register it.
23
Publicidad
