Congratulations on purchasing your
telephone amplifier TA-2. We hope it
will provide you with many years of
service. You have chosen a very reli-
able system.
Please read the user manual carefully
to be able to start the unit correctly
and to familiarise yourself with all the
features this device offers.
Contents of package
Please check if all following compo-
nents are included:
- TA-2
- 12 V power supply unit
- User manual
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Setup
Before using the telephone amplifier
please follow these instructions:
1. Telephone receiver cord
First take the wallplug out of the
socket for your telephone connection.
Remove the receiver cord from its
cable guide on the underside of
your telephone. To do this, push the
locking clip towards the body of the
plug at the same time as pulling the
plug out of the socket using the cord.
Take the plug on the end of the tele-
phone receiver cord and push it into
the socket on the back of the tele-
phone amplifier so the plug clips into
place. The socket is indicated by a
telephone receiver icon.
2. Connecting cable
Take the plug on the end of the
connecting cable for the hearing
amplifier and push it into the receiver
socket on the base of the telephone.
Position the cable in the empty cable
guide.
Finally reconnect the wallplug into
the wall socket for your telephone
connection.
Your telephone is now ready to
operate again.
Switching on
The hearing amplifier automatically
switches itself on when you pick up
the handset of the telephone.
The green light on top of the unit
lights up to indicate this.
Setting the volume/tone
You can use the dial barrel on top of
the hearing amplifier to adjust the
volume of the signal to a comfortable
level. Turning the dial to make the
larger numbers on the scale visible
increases the volume, and vice versa.
You will be able to feel the stop at
either end of the dial's travel. Please
do not try to force the dial past these
points.
In addition, you can adjust the tone
using the tone control.
English 9