Speaker Setup - Loewe Satellite Instrucciones De Manejo

Satellite Speaker / Stand Speaker
Operating instructions
Setting up / Connection

Speaker setup

• Place the speakers on a stable, smooth base or use the optional Loewe wall
mount.
• Lay the speaker cables in such a way that they cannot be damaged.
• The speakers generate magnetic dispersion fields which act in the vicinity of
the housing. We recommend a minimum distance of > 0.5 m from magneti-
cally sensitive equipment such as magnetic data media etc.
Only use Loewe original accessories (page 9) for the setup solution on the
ceiling, wall and floor or position the speakers at a suitable height on furniture
or shelves.
To ensure as optimum a listening experience as possible, the speakers should
be set up symmetrically to their your seated position - see figure below.
Front
left
Surround
left
- 8
Front
right
Subwoofer
Surround
right
Connection
Satellite Speaker
Thread the speaker cable (C) through the hole in the speaker cover provided (A).
One of the two wires of the speaker cable (C) is marked black. Connect this wire
marked black to the black terminal on the speaker. Connect the unmarked wire
to the red terminal. Press the speaker cover (A) back onto the Satellite speaker.
Stand Speaker
Place the Stand Speaker carefully on a padded base. Turn the two screw terminals
(B) anticlockwise until the terminal openings are visible.
Connect the wires marked black of the speaker cable (C) to the black terminal
screw on the speaker. Connect the unmarked wires to the red screw terminal.
Turn the screw terminals clockwise to fasten the speaker cable.
C
A
B
C