Touch Control Panel; Operation - Vortice AIRTEK 360 Manual De Instrucciones

ENGLISH

Touch Control Panel

Filter Status
Speed Display
Power
Button
UltraSense PM2.5
Display
UV-Photo Tech
Button

Operation

Getting Started
After the main power switch is in the on position, press the Power Button on the control panel. The air quality
display will blink for 30 seconds as it calibrates. Once calibration is completed the purifier will run in Smart Auto
mode.
Smart Auto mode:
To enter the Smart Auto mode press the Auto button.
In this mode, the Auto indicator will glow and the unit automatically adjusts the air flow depending on the indoor
air quality. The air quality indicator light will change according to the air quality.
Light Color
Air quality
Vita-Ion function:
Press the Vita-Ion button to activate the Ionizer purification function to help reduce dust, airborne chemicals,
bacteria, and viruses. We recommend activating this function for daily use.
UV PhotoTech function:
Press the UV button to activate the UV PhotoTech lamp. The UV rays, together with the photocatalytic filter, will
catalyze and degrade contaminants in the air around you. We recommend activating this function for daily use.
Sleep mode:
Press the Sleep button to activate this function.
In this mode the sleep indicator will illuminate and the air purifier will run in a 3 speed, quiet manner.
Manual mode:
Press the Air Flow button repeatedly to change the purifier's speed.
In this mode the corresponding speed indicator will be shown on the middle display and the air purifier will run
continuously in the selected speed.
Timer function:
Press the Timer button repeatedly to set a timer between 0.5-24 hrs. after which the purifier will automatically
shut off. The timer will be shown on the top display. To deactivate the timer keep the button pressed for 3
seconds.
16
Speed Selector
Blue Yellow
Good Moderate
Timer/Residual
Life of Filters
Timer Button
Lights ON/OFF
Smart Auto
Mode
Vita-Ion Ionizer
ON/OFF
Sleep Mode Button
Purple
Polluted
Red
Unhealthy