Samson Graphite 49 Manual Del Propietário página 23

Graphite 49 · USB/MIDI Keyboard Controller
Performance Mode Parameters
Trigger Pads
The keyboard features four assignable velocity-sensitive trigger pads with aftertouch. The
factory setting for the trigger pads is to function as drum pads. When you strike the pad, a cor-
responding icon will appear and its note MIDI message will be transmitted on channel 10. The
pad number and the velocity curve number will be shown in the Operation and Data area of
the display and the port, channel, pad type, pad mode and note number information will be
shown under relevant tags. When you press a pad, and continue to press it, the pad will send a
channel aftertouch message depending on how hard you press the pad.
The pads are configured to two pad banks with different settings for each pad, for a total
of eight individual pads. Press the PAD BANK button to switch between the two banks. The
active bank will be shown on the display. The factory default settings for pads are listed in the
Factory Default Setting table on p. 32. You can select the pad velocity curve, change param-
eters, or assign other controls to pads in the Setup Mode.
Setting the Channel, Program, MSB, LSB and Port for the Keyboard
Some parameters can be edited from the Performance Mode. Press the PAGE ◀ / ▶ buttons
to cycle through the parameters. Use the DATA +/– buttons to edit data. The edited data in the
second row of the display will flash. When you have completed making your changes for all
items, press the ENTER button to confirm and transmit them together. To cancel your changes,
press the MAIN button. All data will be recovered to its original value.
Please see the table below for details on the adjustable parameters:
Tag Description
Program Program number
MSB Most Significant Bit of program bank for keyboard playing
LSB Least Significant Bit of program bank for keyboard playing
Port Transmitting port
Ch. Transmitting channel
Range Factory default setting
0–127 0
0–127 0
0–127 0
1–5 1
1–16 1
23