Tabla de contenido
Publicidad
impact; this waste must not be disposed of
as normal waste, it must be separated and
taken to specified waste disposal centres
where the material will be recycled.
• Scrupulously comply with local regulations
for the disposal of waste materials
• When the machine is withdrawn from service,
do not dump it in the environment, but take
it to a waste disposal facility in accordance
with the local regulations in force.
Do not throw electrical equipment away
with domestic waste. According to the
European Directive 2012/19/EU on
electrical and electronic equipment
waste and its implementation in
compliance with national standards, old
electrical equipment must be collected
separately, for eco-compatible recycling. If
electrical equipment is disposed of in a landfill
or in the ground, the harmful substances can
reach the water table and enter the food chain,
damaging your health and well-being. For
further information on disposing of this product,
contact the competent authority for the disposal
of domestic waste or your dealer.
At the end of their working life, dispose
of batteries paying due attention to the
environment. Batteries contain material
classified as hazardous for you and the
environment. They must be removed
and disposed of separately at a facility that
accepts lithium-ion batteries.
Separate waste collection of the
products and packaging used allows the
materials to be recycled and reused.
Reuse of recycled materials help to
prevent environmental pollution and
reduces the demand for raw materials.
3. GETTING TO KNOW THE MACHINE
3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a forestry tool and
precisely a battery powered chain saw.
The machine is essentially composed of
a battery powered motor and a guide bar
that takes the power from the battery to the
motor which drives the cutting chain.
The operator is able to operate the
machine with two hands, using the front
and rear handgrips, and can use the
main controls, always remaining at a safe
distance from the cutting means.
3.1.1
Intended use
This machine was designed
and manufactured for:
– felling, bucking and delimbing trees
with dimensions suitable for the length
of the guide bar or wooden objects
with the same characteristics;
– use by one operator.
3.1.2 Improper use
Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or cause damage. Examples of
improper use may include, but are not limited to:
– trimming hedges;
– carving operations;
– sectioning pallets, crates and
various packing materials;
– sectioning furniture or other materials with
nails, screws or other metal components;
– butchering meat;
– using the machine to cut materials
other than wood (plastic materials,
building materials);
– using the machine to lift,
move or split objects;
– using the machine while
fastened to fixed supports;
– using cutting means other than those
found in the "Technical Data" table.
Serious injury and wound hazard.
– use of the machine by more
than one person.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3
User types
This machine is intended for use by
consumers, i.e. non-professional operators.
The machine is intended for "DIY" use only.
3.2 SAFETY SIGNS
The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
EN - 5
Publicidad
Tabla de contenido
