Technical Data; Before Starting The Equipment; Working With The Hedge Trimmer Mounting Kit - Gardol GATH-E 20 Li Manual De Instrucciones

Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Cutter bar length: ................................... 450 mm
Max. cutting length: ................................ 400 mm
Tooth spacing: .......................................... 16 mm
Cuts/min: ..................................................... 1700
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L sound pressure level ................... 78,30 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
LWA sound power level measured .. 98.23 dB(A)
K uncertainty ............................................. 3 dB
WA
LWA sound power level guaranteed ... 102 dB(A)
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_GATH_E_20_Li_SPK7.indb 13 Anl_GATH_E_20_Li_SPK7.indb 13
GB
≤ 2.5 m/s
2
h
- 13 -
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

5. Before starting the equipment

Caution! Do not fi t the battery until the equipment
has been fully assembled and all the settings
have been actuated. Always wear protective
gloves when working on the equipment to protect
yourself against injury. Carefully unpack all parts
and check that they are complete (Fig. 1).
5.1 Fitting the hedge trimmer mounting kit to
the motor head (Fig. 2/3)
The guard must be slipped over the hedge cutter
blade in order to prevent injuries.
1. Position the hedge trimmer mounting kit and
the motor head such that the arrows on both
parts coincide.
2. Press the hedge trimmer mounting kit against
the motor head. This will cause the lock
button (R) to be pushed to the right. Turn the
hedge trimmer mounting kit clockwise. The
hedge trimmer mounting kit will lock onto the
motor head and is then secured in place. This
will cause the lock button (R) to be pushed to
the left.
5.2 Removing the hedge trimmer mounting
kit from the motor head (Fig. 2/3)
The guard must be slipped over the hedge cutter
blade in order to prevent injuries.
1. Pull the lock button (R) to the right.
2. Turn the hedge trimmer mounting kit to the
point where the arrows on the motor head
and hedge trimmer mounting kit coincide,
allowing the mounting kit to be removed.
6. Working with the hedge trimmer
mounting kit
•
Check that the cutters work properly. The
twin-bladed cutters rotate in opposite direc-
31.07.2017 10:21:10 31.07.2017 10:21:10