Power Supply Connections; Gain Control - Genius Audio GTM-80.4D Manual Del Usuario

4. Chassis Ground
The chassis ground connection is critical
for amplifier performance. Choose a place
that is close to the amplifier. Scrape the paint
thoroughly and if possible use a nut and bolt.

5. Power supply connections

Cut each wire approximately ½ "at the end,
connect the positive cable (12V) to the power
cable of the battery, the REM (Remote) cable
goes from the amplifier to REM cable (Remote)
player and GND (Ground) is connected to
chassis ground.
6. Connecting the RCA signal input
Connect the RCA cables to the input
connectors.

7. GAIN Control

Turn the LEVEL control fully to the left
(minimum).
- 08 -
GAIN
0.2V
5V
GT TECHNOLOGY