Accessories; Repairs; Environmental Protection; Technical Specifications - Metabo KHE 76 Instrucciones De Manejo

Electromagnetic disturbance:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances.

11 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Extensive drill bit and chisel assortment for a
wide range of applications.
B Special grease (for lubricating the tool shanks)
For a complete range of accessories, see
www.metabo.com or the main catalogue.

12 Repairs

Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.

13 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.

14 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
P = Nominal power input
1
P = Power output
2
T = Torque
n = No-load speed
0
D = Max. drilling diameter in concrete
1
with impact masonry bits
D = Max. drilling diameter in concrete
2
with impact core cutters
D = Max. drilling diameter in concrete
3
with milling cutters
s = Maximum impact rate
max
W = Single impact energy
C = Number of chisel positions
m = Weight without mains cable
Wear ear protectors!
Machine in protection class II
This tool is for professional use and may slightly
exceed the guide values for current harmonics
when connected to the public low-voltage
network. Before connecting the tool to the public
low-voltage network, therefore, consult your local
power supply company if necessary.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
9