Cyber Acoustics CA-SP26BT Manual De Instrucciones página 9

Controls and Features
• Power – The on/off button is on the side of the control pod. Slide to turn the speaker on or off.
• Master Volume Control – This control is on top of the control pod, with "MAX" and "MIN" volume markings.
• Input selection button – Use this button to switch between your audio source (Bluetooth and AUX IN)
• Bass Volume Control – Located on the back of the subwoofer, it is indicated by the "Bass Vol" markings.
Rotate clockwise to turn volume up or counter-clockwise to turn volume down.
• Headphone Output Jack – Connect your favorite headphones to this jack and they will mute the speaker
system automatically.
• Auxiliary Input Connection – The auxiliary input jack allows connection of a second input source. An example
of this would be if your speakers are connected to your computer, the second 3.5mm input jack on the side
of the control pod would allow you to quickly connect an iPod/MP3 player and then override your computer
input while it's plugged in.
• Main Power switch – The master on/off control is on the subwoofer. Press to turn the speaker on or off.
• LED
Blinking Blue – Device is under pairing mode
– Bluetooth device connected for play back
Blue
Green – Audio playback through 3.5 mm input
LED
Power on / off
Auxiliary input jack
Headphone output jack
Trouble shooting Bluetooth connections
Can't connect for the first time
1. Turn off the speaker completely and then turn on the speaker. Follow the above manual on Bluetooth Connection
for 1st time connection.
Can't connect when returning to the speaker system
1. If the system does not automatically reconnect with your Bluetooth-enabled device, you may need to physically
go to your device's Bluetooth setting and manually select again "CA-SP26BT" to reconnect.
2. You may also try going to your device's Bluetooth settings and select "Forget this device" to remove the speaker
system from the list. You may need to turn off the Bluetooth function on your devices to fully clear the list. Then see
steps above by following the Bluetooth Connection for 1st time connection.
3. Check to see if any other devices are already connected to the system. The rst indication for this is the speaker
LED status light will show solid Blue. The speaker can only pair with one device at a time. Go to that source
device to disconnect from the system rst. Then you can follow the above steps for 1st time Bluetooth Connection.
Audio is choppy or keeps disconnecting
1. Be sure to check your room environment. Bluetooth technology has a range limit of approximately
30 feet - line of sight. This generally means your best results will be limiting your source device and speakers to
the same room. Extremely large rooms, or rooms with a lot of wireless electronics, wi- routers, etc., may affect
the quality of sound, connection or connection consistency.
2. Check for obstructions, walls, too many people, or other objects that might impede the Bluetooth signal.
3. Try returning the Bluetooth source device to a closer proximity with your speakers.
Master volume control
Master volume control
Input selection button
Input selection button
Bass volume control
Auxiliary input jack
8
Main Power switch
Bass volume control