Descargar Imprimir esta página

Tabla De Contenido; General Information; System Description - Sundstrom SR 500 Instrucciones De Uso

Ocultar thumbs Ver también para SR 500:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40

1. General information

Use of a respirator must be part of a respiratory protec-
tion program. For advice see EN 529:2005 or AS/NZS
1715:2009. The guidance contained in these standards
highlights important aspects of a respiratory protective
device program but does not replace national or local
regulations.
If you feel uncertain about the selection and care of the
equipment, consult your work supervisor or get in touch
with the sales outlet. You are also welcome to get in
touch with the Technical Service Department at Sund-
ström Safety AB.

1.1 System description

The SR 500 is a battery-powered fan unit that, together
with filters and head top, is included in the Sundström
fan-assisted respiratory protective device systems con-
forming to EN  12941 or EN  12942 and to Sund ström
Powered Air Purifying Respirator (PAPR) system confor-
ming to AS/NZS 1716:2012.
The fan unit is to be equipped with filters, and the filte red
air is supplied through a breathing hose to the head top.
The above-atmospheric pressure then generated pre-
vents pollutants from the surroundings from penetra ting
into the head top.
Before use, both these user instructions and those for
the filter and head top must be carefully studied.
Fan unit
The characteristics of the SR 500 are as follows:
• Operating time of up to 12 hours.
• The battery is of lithium ion type that is good for at
least 500 charging cycles.
• The same control is used for starting, stopping and
selection of operating status.
• Display with clear symbols.
• Initiates an alarm by vibration and sound/light signals
in the event of an obstruction in the air flow.
• Equipped with automatic air flow control with com-
pensation for air pressure and temperature.
• To be used with two filters/combined filters.
• Can be used together with a hood, visor, welding
shield, half mask, full face mask, helmet with visor or
welding shield together with helmet with visor.
Filters
See chapter 3, section Filter.
Breathing hose
The breathing hose is not included with the fan unit but
is supplied with the relevant head top.
The breathing hose for half mask and full face mask is
purchased separately.
34
Fan unit SR 500
Head top
The choice of head top depends on the working envi-
ronment, work intensity and the required protection fac-
tor. The following head tops are available for the SR 500:
• Class TH3 hood, model number SR 520.
• Class TH3 hood, model number SR 530.
• Class TH3 hood, model number SR 561.
• Class TH3 hood, model number SR 562.
• Class TH3 visor, model number SR 540.
• Class TH3 visor, model number SR 570.
• Class TH3 welding shield, model number SR 590.
• Class TH3 welding shield, model number SR 592.
• Class TM3 full face mask, model number SR 200.
• Class TM3 full face mask, model number SR 200 Airline.
• Class TM3 half mask, model number SR 900.
• Class TH3 helmet with visor, model number SR 580.
• Class TH3 weldning shield together with helmet with
• Class TH3 gold-plated shield together with helmet
• Class TH3 shield 2/3, EN 3 together with helmet with
• Class TH3 shield 2/3, EN 5 together with helmet with
1.2 Applications
The SR 500 can be used as an alternative to filter respi-
rators in all situations for which these are recommended.
This applies particularly to work that is hard, warm or of
long-duration.
When selecting filters and head top, the following are
some of the factors that must be taken into account:
• Possible occurrence of explosive atmosphere
• Types of pollutants
• Concentrations
• Work intensity
• Protection requirements in addition to respiratory
The risk analysis should be carried by a person who has
suitable training and experience in the area.
1.3 Warnings/Limitations
Note that there can be national differences in the regula-
tions for use of respiratory protective equipment.
Warnings
The equipment must not be used
• In the power-off state. In this abnormal situation a ra-
• If the surrounding air does not have a normal oxygen
• If the pollutants are unknown.
• In environments that are immediately dangerous to
• With oxygen or oxygen-enriched air.
• If you find it difficult to breathe.
• If you can smell or taste the pollutants.
• If you experience dizziness, nausea or other
visor, model number SR 584/SR 580.
with visor, model number SR 587/SR 580.
visor, model number SR 588-1/SR 580.
visor, model number SR 588-2/SR 580.
protective device
pid build-up of carbon dioxide and depletion of oxy-
gen may occur in the head top and no protection is
given.
content.
life and health (IDLH).
discomfort.
EN

Publicidad

loading