newmotion Home Standard Manual De Instrucciones página 12

3. PRODUCT OVERVIEW
3.5 BACKOFFICE CONNECTIONS
The Home Standard & Home Fast can be connected to
the NewMotion backoffice in two ways:
1. Ethernet connection
2. 2/3/4G with NewMotion mobile router
The Home Standard & Home Fast will connect to the
NewMotion backoffice so settings can be changed
remotely and for remote support to be given. Without the
backoffice connection, none of our online services can
be used.
3.5.1 HOME STANDARD & HOME FAST –
ETHERNET / NEWMOTION MOBILE ROUTER
Connecting the Home Standard & Home Fast to an
ethernet or mobile router can be done by connecting the
network to the UTP Ethernet data port with a cable max
50 meter long.
(Mobile)
Router
Settings might have to be changed in the network to
allow the charge point to make a successful connection
to the NewMotion backoffice.
The network should have:
- DHCP
- Port TCP 80 and 443 should be opened
- FTP port 21 should be opened
- All opened ports should be inbound and outbound
FTP is needed to update the firmware of the chargepoint
and exchange diagnostics.
INSTRUCTION MANUAL – P12 INSTRUCTION MANUAL – P12
0506NM20INT02