Before Use; Filling With Water - Taurus VERONA 6 Manual De Instrucciones

- Ensure that the voltage indicated on the
nameplate matches the mains voltage before
plugging in the appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not force the electrical wire. Never use
the electric wire to lift up, carry or unplug the
appliance.
- Do not wrap the cable around the appliance.
- Ensure that the electric cable does not become
trapped or tangled.
- Do not allow the connection cable to come into
contact with the appliance's hot surfaces.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, imme-
diately disconnect the appliance from the mains
to prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- The appliance should be used and kept over a
flat and stable surface.
- This appliance is not suitable for outdoor use.
- The power cord must be regularly examined for
signs of damage and if damaged, the appliance
must not be used.
- Do not use the appliance, in the case persons
insensitive to heat (the appliance has heated
surfaces).
- Do not touch metal parts or the body when it is
operating, as it may cause serious burns.
USE AND CARE
- Do not use the appliance without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Respect the MAX and MIN levels (Fig. 1)
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowled-
ge.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has
been removed.
- Before making coffee for the first time, we
recommend using the coffee maker twice with
water only, in order to clean the system.

FILLING WITH WATER:

- The deposit must be filled with water before
turning the appliance on.
- Lift the lid
- Fill the compartment with cold water.
- Fill the tank observing the MAX and MIN levels
according to the number of cups of coffee to be
made
- Close the lid.
- Filling with coffee:
- Open the filter holder. (Fig. 2)
- Remove the filter holder.
- Fill the removable filter with ground coffee (67 g
per cup to be prepared).
- Check that the removable filter is perfectly fitted
into the filter holder.
- Fit the filter holder in the appliance once more.
- You can use the measuring spoon to add
coffee.
USE:
- Follow the procedures for "filling with water"
and "filling with coffee".
- Unroll the cable completely before plugging it
in.
- Place the goblet on the heating plate.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- The pilot light (E) comes on.
- The goblet can be removed while the coffee is
being made. The antidrip system prevents the
coffee from spilling when the goblet is not in its
position. However, if the goblet is kept out of
its position for over 30 seconds, before all the
water has passed through the filter, the filter
may overflow.
- If you want to keep the coffee hot, place the
goblet on the heating plate without switching off
the coffee maker.