Cleaning And Storage; Technical Data - JOCCA 5003C Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

14-EN
-Leave sufficient space above and around the appliance for the
air to circulate correctly.
-Do not let the appliance come into contact with curtains,
wallpaper, dishcloths or other inflammable materials when it is
in use.
-Do not use any other connector than the one supplied with the
product.
INSTRUCTIONS FOR USE
-Before using the appliance for the first time clean the plates with
a damp cloth and leave to dry.
-Connect the appliance to the mains and select the desired
temperature.
The indicator light will come on and when the plate reaches the
desired temperature, the indicator light will go off.
-Carefully place the food on the cooking plate, if you wish you
do not need to use either oil or butter, thanks to its nonstick
coating.
-Once the food has been cooked, remove it from the griddle, but
do not use sharp objects to move the food as these may damage
the nonstick coating. It is advisable to use wooden spatulas.
-After each use, switch the appliance off using the temperature
selector and unplug the appliance from the mains.

CLEANING AND STORAGE

-Before cleaning the appliance, make sure it has been
disconnected from the mains.
-Leave the appliance to cool down before cleaning it.
-Do not use abrasive detergents or products that may damage
the appliance.
-Do not use metal scourers that may damage the nonstick
coating.
-NEVER IMMERSE THE APPLIANCE OR THE CONNECTOR IN
WATER OR ANY OTHER LIQUID.
-Do not place the grill plate or the connector under the tap.
-Use a damp cloth or sponge to clean the inside and outside of
the plates.
-After each cleaning operation make sure that the fixed grill
contacts are perfectly dry, to proceed to use it again.

TECHNICAL DATA

230V ~ 50Hz 2000W
This device conforms to the safety requirements and provisions of
directives 2014/35/EU on Low tension devices and 2014/30/EU
on Electromagnetic Compatibility.
PRODUCT RECYCLING - ENVIRONMENT
Packaging
The materials used in this product's packaging are
integrated in a system of waste collection, sorting
and recycling. If you wish to dispose of these
materials, you should use rubbish bins or other
municipal means of waste collection that are
appropriate for each type of material.
Electrical and Electronic Product
This symbol means that if you wish to dispose of this
product at the end of its life, you must take it to a
waste collection company authorized for the
selective collection of Waste Electronic and Electrical
Equipment (WEEE).
This product does not contain concentrations of
materials considered harmful to the environment.
EN-15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5003p

Tabla de contenido