Safety Instructions; Transport And Positioning - patura Klima-Raufe 303640 Instrucciones De Montaje

Bedienungsanleitung / Manuel d'utilisation
Mounting Instructions / Bedieningshandleiding
Instrucciones de uso
Ref. 303640
PATURA Weather Protective Feeder
1. Description
The roof for the weather protective feeder fits all models of PATURA Professional Rectangular Feeders and has a
large shading area of approx. 36 m² with a centrally installed chimney for optimum air exchange. It offers the
animals a large shading area and optimal protection against rain.

2. Safety Instructions

• It is strongly recommended to anchor the weather protective feeder to the
ground after positioning.
• With high winds or when large amounts of snow are expected, or when
snow loads are high, the side elements have to be in a folded down position.
• When folding down the side elements, one person must support the panel
and another person has to release the locking bolts.
• When transporting the feeder on the road, lighting devices must be fixed in
accordance with the German Road Traffic Regulations (StVO). Also a
tensioning belt must be used so that the side elements can't touch the rear
wheel of the tractor.

3. Transport and Positioning

Only transport the feeder in a folded down position. When transporting the feeder on the road, lighting devices
must be fixed in accordance with the German Road Traffic Regulations (StVO). Also a tensioning belt must be used
so that the side elements can't touch the rear wheel of the tractor. When towing the feeder, please note that the
range between tractor and three-point linkage is limited.
A tractor linkage and a top link are required for the transport. The top link must be attached from below to the
bolts. The use of a hydraulic top link is recommended.
If the feeder is securely attached to the tractor via the three-point linkage, it can be transported (2.40 m width).
Position the feeder in your pasture on the ground where the surface is as level as possible. Make sure there's a
sufficient distance to adjacent objects or buildings so that the side elements of the feeder can be opened without
any problems. Once the feeder is positioned at the desired location, it's recommended to secure it in order to