Moretti KYARA AIRY LTK120 Manual De Instrucciones página 19

1. Place your Compressor Nebulizer on a flat and
stable surface. Be sure that you can easily
reach the controls when you are seated.
2. Open the top cover. Important: Prior to initial
operation, the nebulizer should be thoroughly
cleaned referring to the "Cleaning Procedures"
in the manual.
3. Gently twist the top part of the nebulizer
counter-clockwise to disassemble the nebulizer.
4. Fill the bottom section of the nebulizer with the
medication prescribed by your physician. Be
sure that the cone is put Inside the bottom
section.
5. Gently twist the top part clockwise to
reassemble the nebulizer. Be sure the two
sections fit well.
6. Attach one end of air tube to the base of the
nebulizer.
7. Attach the other end of air tube to the air tube
connector located on the front of the
compressor.
8. Attach mouth piece or mask per your choice to
the top section of nebulizer.
9. Plug the power cord into an appropriate
electrical outlet. Make sure at this stage, the
power switch is at "OFF" status.
10.Press power switch to begin your prescribed
treatment.
Important:The compressor motor has a thermal
protector which will shut off the unit before the
unit is overheated. When the thermal protector
shuts the unit off, please:
a. Switch off the unit.
b. Unplug the unit from the electrical outlet.
5