Safety Information - Handicare SystemRoMedic MiniLift160EE Manual De Usuario

MiniLift160EE/MiniLift160EM
SystemRoMedic
TM
13
3
1
7
9
14
6
MiniLift160 is a mobile sit-to-stand lift which has been developed to, as gently as possible, assist the user when rising
from a sitting to a standing position. When MiniLift160 is combined with the appropriate lifting accessories, the user gets
support under the feet, for the front of the lower legs and behind the back, which provides for a safe and secure
sit-to-stand procedure. The construction safely moves the user forwards and upwards in a natural movement pattern
and, at the same time, the leg muscles and balance is exercised. MiniLift160 is available in four variants with electrical
(EE) or manual (EM) base widening and with standard height or low legs for use with lower beds. All variants are
manufactured in steel for stability and strength and are suitable for users weighing up to 160 kg/350 lbs.
4

Safety information

Visual inspection
Inspect lift functions regularly. Check to ensure that material is free from damage.
Before use
Make certain the lift is properly assembled.
Check sling bar connection and safety latch function.
Check lifting function and base-width adjustment.
Check to ensure that the actuator is correctly installed.
Always read the user manual
Always read the user manuals for all assistive devices used during a transfer.
Keep the user manual where it is accessible to users of the product.
Always make sure that you have the right version of the user manual.
The most recent editions of user manuals are available for downloading from our website, www.handicare.com.
Under no circumstances may the lift be used by persons who have not received instruction in the operation of the lift.
It is strongly prohibited to modify the original product.
SystemRoMedic
U S E R M A N U A L
TM
2
4
5
12
1. Lift arm
2. Hooks for lift vest/sling
3. Hand control
4. Leg support
5. Footplate
6. Rear castos with brakes
7. Battery
8. Emergency stop
8
9. Adjustment of leg support
10
11
10. Electrical emergency lowering
11. Charging lamp
12. Front castors
13. Locking mechanism for adjustment of lift arm
14. Base-width adjustment
NAME DATE TITLE
MiniLift 160EE
2015-03-13
CREATED
Released
STATUS
SCALE PROJECTION SIZE DWG. NO.
A3 90003418
1:20
MATERIAL:
Material <not specified>
MATERIAL SPECIFICATION:
38130.55 g
WEIGHT:
This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare
and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.
English
B
C
D
REV.
01
SHEET 1 OF 1
3