Velleman SP150 Manual Del Usuario página 4

For optimum safety, we recommend use of override as protection in case of relay or
system failure.
Solder all connections.
1. Keypad override : Connect wire from 12V 3Amp toggle override switch to orange
wire from pin 85 on relay. Connect other side of toggle to clean chassis ground.
ON/OFF 12V
T oggl e Swi t ch
12V 3Am p
2. System override : Connect wires from 12V 20Amp toggle switch toggle switch across
the cut starter solenoid wires.
Yel l ow
Whi t e
86
Or ange
85
SP150
OPTIONAL OVERRIDE INSTRUCTIONS
Yel l ow
Whi t e
86
RELAY
Or ange
85
Chassi s
Gr ound
Bl ack
30
RELAY
87
Bl ack
Bl ack
30
87
Bl ack
T o St ar t er
Sol enoi d
Cut
T o St ar t er
Sol enoi d
4
Cut
ON/OFF 12V
T oggl e Swi t ch
12V 20Am p
VELLEMAN