Mitsubishi Electric Mr.SLIM PKA-RP35HAL Manual De Instrucciones página 9

6. Timer
2. Press the Timer Menu button
screen (at ). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the Timer On/Off (Set Day) button
advances the display at to the next setting, in the following se-
quence: "Sun Mon Tues Wed Thurs Fri Sat" → "Sun" → ... → "Fri" →
"Sat" → "Sun Mon Tues Wed Thurs Fri Sat"...
4. Press the or Operation button (
the appropriate operation number (1 to 8)
* Your inputs at Steps 3 and 4 will select one of the cells from the ma-
trix illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
Setup Matrix
Op No. Sunday Monday
• 8:30
No. 1 • ON
• 23 °C
• 10:00 • 10:00
No. 2
• OFF • OFF
...
No. 8
<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 23 °C.
Note:
By setting the day to "Sun Mon Tues Wed Thurs Fri Sat", you can set the
same operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
<Setting the Weekly Timer>
Shows the time Shows the selected operation (ON or OFF)
setting * Does not appear if operation is not set.
SUN
ON
C
WEEKLY
5. Press the appropriate Set Time button
sired time (at ).
* As you hold the button down, the time first increments in minute in-
tervals, then in 10-minute intervals, and then in 1-hour intervals.
6. Press the ON/OFF button
OFF), at .
* Each press changes the next setting, in the following sequence: No
display (no setting) → "ON" → "OFF"
7. Press the appropriate Set Temperature button
temperature (at ).
* Each press changes the setting, in the following sequence: No dis-
play (no setting) 24
No display.
(Available range: The range for the setting is 12 °C to 30 °C. The
actual range over which the temperature can be controlled, how-
ever, will vary according to the type of the connected unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the
Filter button to lock in the values.
To clear the currently set values for the selected operation, press and
quickly release the Check (Clear) button
* The displayed time setting will change to "—:—", and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button for 2 seconds or more. The display will begin blink-
ing, indicating that all settings have been cleared.)
Note:
Your new entries will be cancelled if you press the Mode (Return) button
before pressing the Filter butto
If you have set 2 or more different operations for exactly the same time,
only the operation with the highest Operation No. will be carried out.
9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells
as you wish.
10.Press the mode (Return) button
screen and complete the setting procedure.
11.To activate the timer, press the Timer On/Off button
"Timer Off" indication disappears from the screen. Be sure that the
"Timer Off" indication is no longer displayed.
* If there are no timer settings, the "Timer Off" indication will blink on
the screen.
, so that the "Set Up" appears on the
to set the day. Each press
or ) as necessary to select
.
... Saturday
• 10:00 • 10:00
• OFF • OFF
<Operation 2 settings for every day>
Turn off the air conditioner at 10:00.
Shows the temperature setting
* Does not appear if temperature
is not set.
as necessary to set the de-
to select the desired operation (ON or
to set the desired
25 ... 29 30 12
once.
n
.
to return to the standard control
, so that the
g p y
<How to View the Weekly Timer Settings>
8
1. Be sure that the weekly timer indicator is visible on the screen (at
2. Press the Timer Menu button
screen (at ).
3. Press the Timer On/Off (Set Day) button
day you wish to view.
4. Press the or
the timer operation shown on the display (at
* Each press will advance to the next timer operation, in order of time
setting.
5. To close the monitor and return to the standard control screen, press
the Mode (Return) button
<To Turn Off the Weekly Timer>
Press the Timer On/Off button
10
<To Turn On the Weekly Timer>
Press the Timer On/Off button
goes dark.
10
6.1.2. Simple Timer
■
You can set the simple timer in any of 3 ways.
• Start time only:
The air conditioner starts when the set time has elapsed.
• Stop time only:
The air conditioner stops when the set time has elapsed.
• Start & stop times:
The air conditioner starts and stops at the respective elapsed times.
■
The simple timer (start and stop) can be set only once within a 72-hour
period.
The time setting is made in hour increments.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
... 23
*2. The simple timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in prog-
ress; the remote controller is undergoing self-check or remote control-
ler check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
PAR-21MAA
Timer Settings
9
SUN
T TIMER ON
OFF
C
1
WEEKLY
so that "Monitor" is indicated on the
as necessary to select the
Operation button ( or ) as necessary to change
).
.
so that "Timer Off" appears at
TIME SUN
C
C
so that the "Timer Off" indication (at
TIME SUN
C
C
WEEKLY
Hr ON
AFTER
SIMPLE
TEMP. ON/OFF
MENU ON/OFF
FILTER
B BACK MONITOR/SET DAY
CHECK TEST
R CLOCK OPERATION
CLEAR
).
.
10
WEEKLY
)
10
9