WMF LINEO EDELSTAB 4-in-1 Instrucciones De Uso página 18

Milk frother
With the milk frother, you can froth milk, e.g. for cappuccinos, latte macchiatos
or even desserts.
▪ Attach the adapter (12) by inserting it into the milk frother (14) with light
pressure. The adapter (12) audibly clicks into place.
▪ Attach the adapter (12) down onto the coupling of the drive unit and push it
against the drive unit until the milk frother (14) audibly clicks onto the drive
unit and is therefore locked. There may be no gap between the drive unit
and the adapter (12). The milk frother (14) must sit firmly on the device and
should not be loose or fall off.
▪ Pour milk into a container with a high rim and insert the milk frother (14) into
this container.
▪ Use the rotary ring (1) to select the desired speed.
After connecting the mains plug, push and hold the on-switch (2)
desired result is achieved.
Alternatively, you can also press the turbo button (3)
device then operates at full speed.
▪ Move the milk frother (14) in slight circular movements.
As soon as the foam rises, move the milk frother (14) upwards so that it is
always working just below the surface.
▪ Once the desired result is achieved, wait until the motor and milk frother (14)
stop and disconnect the mains plug.
▪ Loosen the adapter (12) from the drive unit by pressing the unlock button (4).
Pull the adapter (12) away from the milk frother (14).
Whisk
With the whisk you can, for example, prepare beaten egg whites, whip cream or
shakes, desserts, soups, sauces or mayonnaise.
▪ Attach the adapter (12) by inserting it into the whisk (13) with light pressure.
The adapter (12) audibly clicks into place.
▪ Attach the adapter (12) down onto the coupling of the drive unit and push it
against the drive unit until the whisk (13) audibly clicks onto the drive unit
and is therefore locked. There may be no gap between the drive unit and the
adapter (12). The whisk (13) must sit firmly on the device and should not be
loose or fall off.
▪ Put the ingredients into a suitable container and insert the whisk (13).
▪ Use the rotary ring (1) to select the desired speed.
After connecting the mains plug, push and hold the on-switch (2)
desired result is achieved.
Alternatively, you can also press the turbo button (3)
device then operates at full speed.
▪ Once the desired result is achieved, wait until the motor and whisk (13) stop
and disconnect the mains plug.
▪ Loosen the adapter (12) from the drive unit by pressing the unlock button (4).
Pull the adapter (12) away from the whisk (13).
18
until the
to process. The
until the
to process. The