3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Checking for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of transport damage, refuse or accept the delivered product only
with reservations *. A complaint detailing the defects observed must then be made. The perception of damage
is only possible in the event of a complaint formulated within the time limits, ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock greater than 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in a closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Temperature
60 ° C - 300 ° C
Plate diameter
Electrical data
2200W / 230V
Dimensions
Weight
Model
Temperature
Plate diameter
Electrical data
Dimensions
W 440 x D 445 x H 190 mm
Weight
CCR35E
CCR35EF
60 ° C - 300 ° C
350 mm
350 mm
2200W / 230V
H 130 mm
H 135 mm
13 Kg
CCC40E
60 ° C - 300 ° C
400 mm
2700W / 230V
16 Kg
CCR40E
60 ° C - 300 ° C
400 mm
2700W / 230V
H 130 mm
13 Kg
18 Kg
CCD35E
60 ° C - 300 ° C
350 mm
2200W / 230V
W 770 x D 400 x H 190 mm
26 Kg
CCC35E
60 ° C - 300 ° C
350 mm
2200W / 230V
W 390 x D 400 x H 190 mm
13 Kg
CCD40E
60 ° C - 300 ° C
400 mm
2700W / 230V
W 910 x D 445 x H 190 mm
33 Kg
EN