Crafstman CMXPTSG1006NB Manual De Instrucciones página 9

Amoladora de troqueles en ángulo de 1/4 pulg.
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
4. Loosen the collet
Spindle Lock
and placing the
6
wrench
9
on the flats of the collet and
turning it counterclockwise.
5. Insert a 1/4 in. shank accessory (not
included) into the collet . Tighten
the collet
by depressing the Spindle
7
Lock
and placing the wrench
6
on the flats of the collet and turning it
clockwise. Make sure the 1/4 in. shank
accessory is installed securely and
tightly.
WARNING: Only use accessories
that have an RPM rating equal to or
greater than the tool itself. Also
make sure any accessory is
compatible with the collet opening.
Before using tool, always make sure
attachments are properly
mounted/secured. If attachments
are not properly mounted/secured,
they can present a serious hazard
and may cause bodily injury for the
operator or anyone in or around the
work area. Always follow the
attachment manufacturer's
specifications for properly attaching
accessories to tool.
8
7
by depressing the
7
9
2
6
7
2
6
7
9
PUSH
9
PUSH

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Crafstman CMXPTSG1006NB

Tabla de contenido