Fagor BB-300BF Manual De Instrucciones página 14

1. INTRODUCTION
This appliance works on the principal
of measuring the body's electronic
impedance, which is referred to using the
term bioelectric, i.e. "bioelectric impedance
analysis" (BIA), a factor relating to the
percentage of body fat and body water,
while taking other physical factors into
consideration (age, sex and weight). This
weighing scale can also measure bone
mass, muscle mass and the number of
kilocalories required during the day.
Before using the scales for the first time,
read this manual carefully to guarantee its
correct functioning and extend the life of
the appliance. Keep the instructions for
later reference.
2. IMPORTANT INFORMATION
1. The readings for your body fat and water
percentage are guidance measurements
only. This appliance is not recommended
for therapeutic use. Please consult your
doctor for advice on any medication or
diet you should follow in order to reach a
normal weight.
2. The use of these scales is not
recommended for persons using
pacemakers or other therapeutic implants
with electronic components. It could
be dangerous and could reduce the
performance of the implant.
3. To avoid any interference, do not use
this appliance near devices with a strong
electromagnetic field. Always keep well
away from any such devices when you are
using the scales, or simply switch off any
devices emitting strong electromagnetic
fields before using it.
EN
3. APPLIANCE DESCRIPTION (FIG. 1)
1. Display.
2. and : Data selection buttons.
3. Set button.
4. Weighing surface.
5. Battery compartment.
4. CHARACTERISTICS /
SPECIFICATIONS
with the following data:
Parameter
programming
Height 170 cm
Age
150 kg / 330 lb.
(CR 2430)
5. SCREEN DISPLAY (FIG. 2)
b. Female
d. Height
e. Age
f. Weight unit
g. Body water percentage
h. Status line
i. Body fat percentage
j. Bone mass
l. Kilocalories
13
Default
Range
80 cm – 220 cm
30 6 -100
LO")
O-Ld)