Using On Ac House Current - Aiwa CS-P700 Instrucciones De Manejo

Using on AC house current

Connect the supplied AC adaptor as
illustrated below.
to a wall outlet
Notes on AC adaptor
• Use only the supplied AC adaptor.
• After use, disconnect the AC adaptor. When
disconnecting from the unit, grasp the adaptor and
not the cord itself.
• Do not forcibly bend the cord or place heavy
objects on it.
• Never handle the AC adaptor with wet hands, as
this could result in fire or shock.
Backup function
The settings of the clock, radio and timer are
maintained for a few minutes after removing the
batteries or disconnecting the AC adaptor. Replace
the batteries while the backup function is activated.
to the DC 6V jack
Specifications
Tuner section
Frequency range, antenna — FM: 87.5 - 108.0 MHz
Rod antenna, AM: 522/530 - 1,611/1,600 kHz (9/10 kHz
step) Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels / Frequency range
— Normal tape: 50 - 8,000 Hz (EIAJ) / Recording
system — AC bias / Erasing system — Magnet erase /
Heads — Recording/playback head (1), Erasure head
(1)
General
Speaker — 58 mm cone type (2) / Output —
Headphones jack (stereo mini-jack) / Power output —
2.3 W + 2.3 W (DIN MUSIC POWER), 1 W + 1 W (EIAJ
4 ohms, T.H.D. 10%), 0.7 W + 0.7 W (DIN 1% Rated
Power) / Power requirements — DC 6 V using four size
AA (R6P) batteries, Domestic AC power using the
supplied AC adaptor / Dimensions — 280 (W) × 102.5
(H) × 60 (D) mm (excluding projecting parts and
controls) / Weight — 700 g (excluding batteries) /
Accessories — AC adaptor (1)
<AC adaptor AC-D606 E, K>
Rated input — AC 230 V, 50 Hz / Rated output —
DC 6 V, 750 mA
Specifications and external appearance are subject to
change without notice.
COPYRIGHT
Please check the copyright laws relating to
recordings from discs, radio or external tape for the
country in which the machine is being used.
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild
detergent solution. Do not use strong solvents
such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
- high frequency sound is not emitted
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape
heads with a head cleaning cassette.
Use separately sold dry-type or wet-type
cleaning cassette.
Refer to the instructions of the cleaning
cassette for details.
En
3
ENGLISH