Using Optional Equipment; Auxiliary Audio Equipment; External Microphone Xa-Mc10 - Sony MEX-BT38UW Manual De Instrucciones

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE/OFF) repeatedly until "AUX"
appears.
After that, "AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 25).
Connecting cord*
(not supplied)

External microphone XA-MC10

By connecting an optional external microphone
to the microphone input connector, you can
improve audio quality while talking through this
unit.
External microphone
Connecting cord
Clamps
Tip
You can set the priority of the microphones (page 26).
Note
Connect XA-MC10 as the external microphone. You
may not be able to call or malfunction may occur if
another device is connected.
27