Installation - BH FITNESS BI200 Instrucciones De Montaje Y Utilización

BI200-BI220

2. Installation

Step one: Insert the steering stick1 into the direction steering wheel. Fasten with three M6
screws (screws and screw driver are in the toolbox). See the illustration below.
Step two: Insert the handle bar into the steering stick 2.Fasten with two M4 screws.
(Screws and screw driver are in the toolbox. Note the direction of back and front). See the
illustration below.
For the safety reason, the connection between handle bar and steering stick is
very tight. Thus you have to press very hard to install the handle bar.
Step three: Insert the steering stick 2 into steering stick 1, use the stand lock to fasten
(The stand lock is in the toolbox. Note the direction of back and front). See the illustration
below.
17