During Use - HJM HRV404 Instrucciones De Uso

Hervidor de agua HRV404_Maquetación 1 11/08/15 08:45 Página 16
• Remove the plug from the wall socket by pulling the plug, not the
power cord.
• Check the appliance's power cord regularly to make sure it is not
damaged. Do not use the appliance if the power cord is damaged.
Have a damaged power cord replaced by a qualified repair service.
• Certain parts of the appliance may get hot. Do not touch these parts
to prevent burning yourself.
• The appliance needs space to allow heat to escape, thereby pre-
venting the risk of fire. Make sure that the appliance has sufficient
space around it, and does not come in contact with flammable
material. The appliance must not be covered.
• Make sure that the appliance, the power cord or the plug do not
make contact with hot services, such as a hot hob or naked flame.
• Make sure that the appliance, the power cord and plug do not make
contact with water.

DURING USE

• Never use the appliance outdoors.
• Place the appliance on a flat, stable surface.
• Always remove the plug from the wall socket after use, and before
cleaning the appliance.
• Never allow the power cord to hang over the edge of the draining
board, worktop or table.
• Make sure that your hands are dry before touching the appliance,
power cord or plug.
• Never use the appliance in a humid room.
• Never immerse the appliance, the plug or the power cord in water
or other liquid.
• Do not pick up the appliance if it falls into water. Remove the plug from
the wall socket immediately and do not use the appliance any more.
• Use solely the base supplied with the jug kettle. Never use the base
for other purposes.
• Remove the jug from the base, and fill with water from the tap.
Never fill the jug above the 'max' level.
• Do not switch on the appliance before you have filled it with water.
Fill only with cold water.
- 16 -
E
N
G
L
I
S
H